Poly F405 AIO Build Inspiration

If you are hesitant about what builds you could make with the Poly F405 2S-4S AIO, then you should definitely check out this article.

In this article, we will feature many amazing Poly board powered builds from the pilots in the FPV community.
In general, the Poly F405 2s-4s AIO can be used for two main category builds: Toothpicks and Micro Cinewhoops.

Toothpicks Category

Touring 122 HDZero 90 FPS by Quad66

Quad66 is the designer of the Touring 122 frame which is intended for 1203 – 1204/1303 2-3 S builds with 3 inch props.

The frame is designed to carry HDZero Nano90 camera.
Quick release canopy systems allows you to access the FC and VTX by only loosening one screw.
The frame also features cross bracing so battery straps can be used to secure the battery

       Build List
  • TUNERC Poly F405 2S-4S AIO
  • Touring 122 frame designed by Quad66
  • FPVCYCLE 13mm 6350 KV motors
  • Gemfan Hurricane 3020 3-blade props
  • HDZero WhoopLite VTX
  • Tattu 2S 550mah battery
2S 3” Toothpick by FerFPV

FerFPV is always ready to conquer the bandos with his amazing micro quads. With this 2S 3″ toothpick powered by our durable 3inch frame and Poly board, Fer had a blast freestyle flying the quad in the bando without worrying about breaking the components. Make sure to check out his instagram for more mindblowing freestyle micro FPV footage.

       Build List
  • TUNERC Poly F405 2S-4S AIO
  • TUNERC 3inch 118mm frame
  • Diatone 1103 10000kv motors
  • Gemfan 3018-2 props
  • Betafpv C02 camera
  • 50.250mw
  • EP2 ELRS
  • Tattu 2S 450mah battery
2S 3” Toothpick by Eekmin

This agile and fast 2S 3″ toothpick build is built by Eekmin. We are always impressed by his clean and beautiful build. Follow Eekmin for more amazing micro drones content.

       Build List
  • TUNERC Poly F405 2S-4S AIO
  • TUNERC 3inch 118mm frame
  • FPVCYCLE 13mm 6350 KV motors
  • Gemfan 3018-2 props
  • Caddx Baby Ratel 2
  • Happymodel OVX303 vtx
  • Happymodel EP2 ELRS
  • Racedayquads 2S 550mah battery

Cinewhoops Category


The ITSY quad is designed by SPYDR. Mighty power in small package. It fits DJIO3 and Caddx Walksnail VTX, 5min+flying time, you can dive through the tiniest gaps, low sweeping landscapes, smooth lines and chase, inside and outside flying! The frame and PNP quads are available at SPYDR website.

         Build List
  • TUNERC Poly F405 2S-4S AIO
  • ITSY frame by SPYDR
  • BetaFPV 1102/14,000kv motors
  • Gemfan 45mm tri-blade props
  • Fits DJI DJI 03 Air Unit
    (standard or naked versions) / CADDX Walksnail (Full size or lightweight)
  • GNB 720mah 2s (For 5+ min flight time)
CineClover85 Lite by Cinewhooptokyo

Cinewhooptokyo is the frame designer behind the Cineclover85lite. Besides Cineclover85 lite, he’s got a Cineclover frame series in his website. Check out the link below.  The frame is designed for U99 (under 99 grams) cinewhoop. You can mount naked Gopro on it and get beautiful, smooth and  steady footgage with a U99 cinewhoop.

Build List
  • TUNERC Poly F405 2S-4S AIO
  • Cineclover 85lite frame designed by Cinewhooptokyo
  • 1103 8000kv motors
  • Gemfan 2020 Ducted 4 Blade D51 Cinewhoop Propellers
  • Caddx Ant Nano Camera
  • GNB 3S 530mAh Battery

More Builds Incoming